Adventurer3 Updates log

Adventurer3-1.3.7-2.1-20230725
1.     Fix the problem the custom temperature set in the [Control Module] does 
 not take effect when using FlashPrint 5 for slicing.

Adventurer3-1.3.6-2.1-20221223
1.   Add license.


Adventurer3-1.3.5-2.1-20220708
1.     Fix the problem that the nozzle temperature calibration interface 
   displays in English while in the Korean status.
2.   Fix the problem of missing translation of "ChangeExtruder" in English.


Adventurer3-1.3.2-2.1-20211216
1.     Always use MAC address of  Ethernet while connecting Polar Cloud

Adventurer3-1.3.1-2.1-20210906
1.     Fix the names of files sliced by new flashprint including dots will lead
  to printing freeze problems

Adventurer3-1.2.9-2.1-20210903
1.      Support New FlashPrint 
2.      Add MAC uploading on FlashCloud
3.      Add Turkish
4.      Display update log


Adventurer3-1.2.7-2.1-20210507-Nation-HK-Factory
1.  Compatible with Nation chip and HK chip

Adventurer3-1.2.7-2.1-20210420-Factory-National
1.   Compatible with Nation chip

Adventurer3-1.2.5-1.6-20210329
1.    Add Polish

Adventurer3-1.2.3-1.6-20210224
1.    Delete filament judgement before printing

Adventurer3-1.2.2-1.6-20210129
1.     Integrate extruder calibration and 9 points leveling
2.     Add extruder selection
3.     Repair system halt caused by camera switch
4.     Add Dutch

Adventurer3-1.2.1-1.4-20201201
1.    Solve the abnormal display of leveling coordinate

Adventurer3-1.1.8-1.4-20201123
1.          Add error code
2.          Modification of wire feeding and thread change

Adventurer3-1.1.7-1.4-20201023
1.          Modify the nozzle not go home then none-point open and print small model
2.          Change the error code prompt

Adventurer3-1.1.5-1.4-20200826
1.         Modify the nine-point leveling position
2.         Restore factory settings, turn off automatic leveling
3.        Fix boot green screen         


Adventurer3-1.1.4-1.4-20200821
1.          Add automatic calibration function
2.          Increase internal printing files nozzle_remover.gx 
3.          U disk reading is abnormal, please unplug and re-plug (modification prompt)


Adventurer3-1.1.3-1.4-20200619
1.	 Add manual load filament function
2.	 Fixed screen freeze problem during load filament
3.	 Check for firmware updates every 12 hours
4.	 Remember the value of the last nozzle calibration
5.	 Additional optimization and bug fixing.

Adventurer3-1.1.2-1.4-20200430
1.	 Modify the problem of M3 upgrade failure
2.	 Modify the way the printer detects whether it is connected to an external network
3.	 Modify the problem of printer MAC address change
4.	 Connect to the new upgrade server
5.              Modify the problem of unstable connection of myminifactory
6.	 Modify the filament detection problem
7.	 Fix some bugs in the firmware


Adventurer3-1.1.1-1.3-20191105
1.	 Add Myminifactory

Adventurer3-1.1.0-1.3-20190816
1.	 Add multicast function

Adventurer3-1.0.9-1.3-20190627
1.	 Improve camera function
2.	 Add to support Hungarian
3.	 Add to support Portuguese
4.	 Add to support Russian
5.	 Hotspot page shows IP address
6.	 Modify the filament feeding method to reduce the time
7.	 Modify German translation
8.	 Adjustable platform temperature during printing
9.	 Keyboard extension character
10.	About page shows printer name

Adventurer3-1.0.8-1.3-20181220
1.	Firmware update can achieve the function of breakpoint 
2.             Fix some issue in wifi page
		
Adventurer3-1.0.7-1.3-20181121
1.	Support Thai、 Korean
2	The temperature is automatically reduced after the loading of the filament and returns to the previous page.
3.	Fix the issue of abnormal sound after printing is complete

Adventurer3-1.0.6-1.3-20180929
1.	Optimize the U disk upgrade process
2.	The temperature is automatically reduced after the loading of the filament

Adventurer3-1.0.5-1.3-20180914
1.	Automatically detect upgrades after networking
2.             The nozzle temperature can be adjusted during printing
3.	Fix some bugs in the printer
4.	Motion control part increases Watch Dog Timer
5.	Motion control part adjusts the screw parameters

Adventurer3-1.0.4-1.1-20180730
1.	Fixed a bug where the FlashCloud was offline after a long time connection
2.	Fix coredump problem during the printing

Adventurer3-1.0.2-1.0-20180522
1.	Do not memorize nozzle calibration values
2. 	Fix connection failed issue with spaces in wifi SSID
3.	Fix printing failure issue in U disk

Adventurer3-1.0.2-1.0-20180502
1.	Add NozzleCheck button on Setting page
2.	Add nozzle temperature adjustment function during printing
3.	Add a loading window to the main page

adventurer3-1.0.1-1.0-20180330
1.	Add adventurer 3 to support the polar cloud platform	
2.	The setting page has two pages and becomes three pages. Add text tips.